what do i need to make a glitter tumbler

If you're into crafts that require patience, making a DIY glitter tumbler will exist right up your alley.  I have to acknowledge I merely recently fabricated my offset stainless steel tumbler with vinyl and glitter and I learned a affair or two.

Because that it tin can exist an intimidating project, I thought I'd pass along what I learned making my first glitter tumbler in this beginner tutorial.

Supplies for Making Glitter Tumblers with Epoxy

Given that I've basically been a professional person crafter for more than than six years at present I usually don't check my supplies before I first a project. Equally Bob puts it: "What more could you possibly demand?" (I started down the Glowforge path, but he stopped me at dryer vent...")

Anyway yous definitely need to make sure you have all the supplies - and there are a lot - before you start making a custom glitter tumbler.  Along with at to the lowest degree iii days, here's a list of what you'll demand for your first tumbler:

• Stainless Steel Tumbler (I used a 20oz)
• Spray Paint
• Painters Record
• Modern Podge
• Silicone Brushes
• Fine Glitter
• Clear Coat Spray
• Epoxy (Both A and B parts)
• Disposable Condom Gloves
• Modest Mixing Cup
• Two Small-scale Measuring Cups (marked with ml)
• Popsicle stick or other stirrer
• Adhesive Vinyl
• Loving cup Turner (This is the one I used: WRMK Spin Information technology)
• 180-220 sand newspaper
• Paper plate or tray to catch drips

How to Spray Paint a Tumbler

Unless y'all want to use an entire bottle of glitter to fully cover your tumbler, information technology's a proficient idea to spray paint it get-go.  Use a like color spray paint as the glitter yous plan to use.  Spray painting first will allow you to use less glitter and if the glitter doesn't cover well in certain spots, it won't be existent noticeable because of the spray pigment.

Before you lot paint the tumbler, use the painters tape to wrap around the entire top and lesser of the cup.

When working on the elevation of the cup, put the tape so information technology'due south half on the lip then fold it down onto the inside to protect that area.  Make sure the tape is sealed down well and there are not wrinkles or spots where paint could potential bleed under the record.

I stuffed my loving cup with paper towels then paint did not become inside the loving cup while painting.

At present to spray paint a tumbler y'all need to use a lite hand or y'all will cease up with drips and uneven pigment. I had an eleven yr quondam helper and ended up with a large drip BUT fortunately after a coat of glitter and ii coats of epoxy, I tin can't even tell where the trip is. So don't worry if you become a baste.

If you actually want ensure yous spray paint the tumbler without drips you can place it on some type of extension pole apparatus and rotate the stop of the pole/turner past hand while you spray pigment with the other hand.

Permit the spray paint dry out really well before you move on.

Do non remove the tape...which I did not realize was a terrible idea til the next stride...

How to Add Glitter to a Tumbler

In that location are several ways to add glitter to a custom tumbler - I went with the Modern Podge method.  You lot can also employ a thin layer of epoxy which I'1000 sure would give you a much more fifty-fifty glitter layer.

Regardless of which you get with it's easiest to add the glitter when the tumbler is on a spinner (and when you have tape protecting the top and bottom of the tumbler) so it's horizontal when y'all are pouring on the glitter.

For the Mod Podge method I did non take the spinner in motion while we worked, but we did rotate it manually equally we worked our way around the tumbler.

Grab a slice of printer paper and crease it downwardly the middle. Place the newspaper below the spinner to take hold of the glitter. The pucker will make it easy to dump the excess back into the glitter jar.

You lot demand to work pretty chop-chop to make sure the Mod Podge does not start drying or it volition exist difficult to get the glitter to stick.

Use one of the silicone brushes to use (what should be) a thick, even layer of Modern Podge all over the tumbler.  Pour on the glitter in sections making certain to cover the entire surface of the cup as you manually rotate it.  Try to make the glitter layer equally even as possible.  The best glitter for tumblers is a high quality glitter that is colored through rather than just on the surface. This is so when you sand your tumbler in a few steps the glitter retains its smoothen fifty-fifty when sanded.

If your glitter tumbler looks like mine (he tried) when you're washed, don't worry you can add more Mod Podge and glitter in a second round.

Permit the glitter and modernistic podge layer dry out for several hours or even overnight.

Now y'all'll want to seal the glitter layer with Krylon Clear Coat Spray. I used two coats and kind of brushed off any uneven large areas of glitter. This simply helps keep all the glitter stay sealed downwards enough so when you add epoxy in the side by side footstep you're non brushing glitter all over the place.

Await several hours for the loving cup to dry really well earlier moving on to epoxy.

Re-Tape the Tumbler to Seal in Glitter

Remove the tape around the elevation and bottom of the cup and replace it with new strips of painters record on both the top and bottom. This second set up of record should be placed so there'south a SLIGHT area of stainless steel showing between the glitter and the tape. That small area, in addition to the residual of the cup Non covered by tape, will be covered in epoxy. Applying the epoxy slightly in a higher place (on the top) and below (on the bottom) the glittered area will seal in the glitter completely.

Setting Upwards the Epoxy Tumbler Turner

Applying the epoxy is the nigh intimidating part of making glitter tumblers with epoxy. It's why I bought all the supplies nearly nine months ago and finally got upwards the nerve to make my commencement tumbler.

Before you lot start mixing and applying the epoxy, set up your work area in an spot where you have some room to piece of work and where you are shut to an outlet.  The epoxy tumbler turner volition need to exist plugged in and on for 6-8 hours at a fourth dimension. I used the WRMK Spin It.  (Information technology worked fine for me - but I don't have anything to compare it to as it'south my beginning cup turner. There are definitely a lot of tumbler turners on Amazon if y'all are looking for something dissimilar.)

With the Spin It turner you tin can adjust the dimension of the turner to make sure various size tumblers spin evenly. A tumbler that spins at an angle, off center, or not completely horizontally tin result in epoxy drips or uneven application.

Grab a newspaper plate and place that below the cup turner to catch any epoxy drips.

How to Mix and Apply Epoxy to a Glitter Tumbler

If you lot're wondering what kind of epoxy to use on tumblers, which is a common question from beginners - I used Amazing Articulate Cast brand epoxy. Information technology comes with both epoxy part that y'all will need to mix together.  You can also become it equally function of a full epoxy tumbler kit.

Exist sure to wear gloves and work in a well ventilated area.  For my 20 oz tumbler, I used 10 ml of epoxy for each of the epoxy layers.  Pour 5ml of A side in one of the measuring cups and v ml of B side in the other.

Pour the thicker (Part A) of the two into the small empty mixing cup. Apply the popsicle stick to scrape the sides then you go every bit much as possible into the other cup.

At present pour the other 5ml part (Part B), which is thinner and easier to pour, SLOWLY into the thicker function. Utilize the popsicle stick to stir the two parts together. Stir slowly then you avoid bubbles. Keep stirring until the epoxy is no longer cloud, but clear.

Turn on your cup spinner then information technology's spinning pretty slowly and brainstorm pouring the epoxy on the loving cup. Employ your other hand or one of the silicone brushes to shine the epoxy across the entire length of the cup.
(Notation: Yous should have tape on your cup at this point. I did not have enough easily to have pictures at the same fourth dimension so these pictures were taken after the tape was taken off.)

Continue to pour on epoxy and smooth it across the cup as the cup rotates until all the epoxy is on the cup and the cup is completely covered.

Once all epoxy is on the cup keep the cup spinning. Wait almost 5-x minutes and carefully (and with gloves all the same on) remove the record from both the top and bottom. If you leave the tape on you'll end up sealing information technology nether the epoxy layer.

Let the tumbler turner spin the cup slowly for 6-8 hours.

Sanding and Adding Vinyl to a Glitter Epoxy Tumbler

When the tumbler is finished spinning, the epoxy will likely nevertheless be somewhat sticky.  Yous tin accept information technology off the tumbler turner and let it dry for several more than hours until it'south no longer pasty.

Use 180-220 grit sandpaper to sand downwardly he glitter tumbler. This part seemed super scary to me. All the sudden my overnice shiny glitter tumbler was looking all scratched upwards and dull.  I sanded enough that it was relatively smooth.

Utilize alcohol on a cotton ball or towel to wipe downwardly the tumbler really well.

If you are going to add together a vinyl decal practice so now.  I cut this peacock from And then Fontsy on holographic agglutinative vinyl. Information technology took a bit to weed but was totally worth it.

Adding a 2d Layer of Epoxy to Seal Vinyl on a Tumbler

Now y'all demand to add a second and last layer of epoxy. Repeat notwithstanding steps from borer the edges to mixing the 2 parts of epoxy to spinning the tumbler for another six-viii hours.  This is how you'll seal the vinyl on the tumbler!

This time when you remove the tumbler from the cup turner let it set for several more than hours to completely cure.

The epoxy tumbler should be at present be polish and glittery.  Exercise not sand the tumbler this time!

Information technology'due south certainly not perfect..just for my commencement become at it - I'm happy with how it came out!

Call back glitter tumblers with vinyl are not dishwasher condom and must be washed past hand.

I could not have gotten through my first tumbler without the aid of Andrea from Designs by Andrea. She's a pro at glitter tumblers...so in instance you're like me and volition probable be one and done with tumblers, at to the lowest degree nosotros know where to take hold of 1!

Note: This post may contain affiliate links. By clicking on them and purchasing products through my links, I receive a minor commission. That'southward what helps fund Silhouette Schoolhouse then I can keep ownership new Silhouette-related products to testify you how to go the most out of your car!

Go Silhouette School lessons delivered to your email inbox! Select Once Daily or Weekly.

shullthavier73.blogspot.com

Source: https://www.silhouetteschoolblog.com/2020/03/how-to-make-glitter-tumblers-with-epoxy.html

Share this post